-edible zone-
Hello!
Greetings from Norway.
The plinth is made from
oak hardwood, two 42mm thick pieces glued together with hide glue.
Then sanded and oiled.
Armboard is made of 4 pieces of
palisander wood glued together. Many weeks of hard labour.
Garrard 401 is tweaked with Kokomo kit, Funk Firm Acromat and Platter
damping rings. Rega rb-300 arm with dismounted trackingforce-spring and
British valuta for more weight Audio-Technica AT-0c9ml/II cartridge
.Rest of system:
.Dynabel 2s speaker kit.
.Music Angel xd-800
integrated amp with Furutec powerplugs, Nos pre-tubes, Duende Critura
tube damping rings, and Pulsarpoint feet.
.Cole phono stage from DIY
Hifi supply.
.Cables from Transparent Audio and Renaissance Audio
Sound is clean, neutral, highly dynamic and realistic. Some of the
best I have heard.
(hint: click on thumbnail for full size)
As you can see, the arm base is separated from the plinth itself.
(hint:
click on thumbnail for full size)
Bottom layer close cutout
Top layer. As you can see the cutout is made closer to the motor than suggested by the template.
Now glued together with hide glue.
Regards
Norvald Dayl, Norway